Dante Operation; Select Devices - Extron electronics NetPA 502 AT User Manual

See the Dante Controller User Guide, available at the
information.
NOTE: After making changes to Dante network routing such as connections (subscriptions), device
names, or channel labels, wait at least 5 seconds before disconnecting or powering down the devices.
This ensures that the new information is properly saved to those devices. Device level configuration
such as sample rates, latency, and clock settings are saved instantly.

Dante Operation

Select Devices

After the receive channels of the NetPA AT are named, they must be routed to a transmit
channel on the audio network.
Dante Controller is required.
Figure 13.
Indicates a pending connection.
Indicates a broken connection (subscription).
Indicates the transmitting device has been removed from the network or is
switched off.
Network Devices
NetPA AT Series User Guide • Dante Configuration and Operation
Audinate website, for additional
22