4.7 PnP/PCI Configurations
4.7.1
PnP OS Installed
Select Yes if you are using a plug and play capable operating system.
Select No if you need the BIOS to configure non-boot device.
4.7.2
Reset Configuration Data
Default is Disable. Select Enable to reset Extended System Configuration
Data (ESCD) if you have installed a new add-on and system reconfigura-
tion has caused such a conflict that OS cannot boot.
4.7.3
Resources controlled by:
The commands here are "Auto" or "Manual." Choosing "manual"
requires you to choose resources from each following sub-menu. "Auto"
automatically configures all of the boot and Plug and Play devices but
you must be using Windows 95 or above.
4.7.4
PCI/VGA Palette Snoop
This is left at "Disabled."
Figure 4.6: PnP/PCI configurations screen
37
Chapter 4