4.6.8
PowerOn By LAN(GigaLAN option)
This item allows you to wake up the system via LAN from the remote-
host. The choices: Enabled, Disabled.
4.6.9
PowerOn By Ring
When Enabled, an input signal on the serial Ring Indicator (RI) line (in
other words, an incoming call on the modem) awakens the system from a
soft off state. The choices: Enabled, Disabled.
4.6.10 PowerOn By Alarm
When Enabled, your can set the date and time at which the RTC (realtime
clock) alarm awakens the system from Suspend mode. The choices:
Enabled, Disabled.
4.6.11 Primary IDE 0 (1) and Secondary IDE 0 (1)
When Enabled, the system will resume from suspend mode if Primary
IDE 0 (1) or Secondary IDE 0 (1) is active. The choice: Enabled, Dis-
abled.
4.6.12 FDD, COM, LPT PORT
When Enabled, the system will resume from suspend mode if FDD,
COMport, or LPT port is active. The choice: Enabled, Disabled.
4.6.13 PCI PIRQ [A-D]#
When Enabled, the system will resume from suspend mode if interrupt
occurs. The choice: Enabled, Disabled.
PCM-4380 User Manual
36