Error Log; Software Version - Vision Fitness T9800S Engineering Manual

DGF1J Upper Board: Engineering Guide

3.5.7 ERROR LOG

Displays text describing the value displayed in the time window. Current displayed values:
1."ERROR CODE" – flagged error code
2."TARGET SPD" – target speed at the time of the error (1/10 MPH)
3."ACTUAL SPD" – actual speed at the time of the error (1/100 MPH)
4."TARGET PWM" – target belt PWM at the time of the error (ticks)
5."ACTUAL PWM" – actual belt PWM at the time of the error (ticks)
6."TARGET ELV" – target elevation at the time of the error (1/10 percent grade)
7."ACTUAL ELV" – actual elevation at the time of the error (a/d ticks)
8."TIME TOTAL" – target program run time (in minutes)
9."TIME EXP" – expired program time (in seconds, only accumulated while belt is running)
10."SCREEN" – screen program was on when error occurred.
SEVEN SEGMENTS
• Elevation – Displays current number of errors
• Speed – Displays current error index (higher number more recent, flashes on and off)
• Distance – Displays the logged error code
• Time – Displays the value of the logged error parameter (see ALPHANUMERIC description above for details on
the unit value).
3.5.8 EXIT
Press the key to return to the main Engineering Mode menu.
"ENTER"

3.6 SOFTWARE VERSION

Press the key to display the product code, software version and checksum in the alphanumeric display.
"ENTER"
For example:
D D G G F F 1 1 J J V V 1 1 . . 0 0 2 2
3.7 EXIT
Press the key to exit Engineering mode.
"ENTER"
Date of last revision: 11.06
3 3 8 8 C C 3 3
22
TREADMILL.UPPERBDENG.DGF1J.CVTM0033.CVTM0031.REV2