P0 Pwm Min Speed; P19 Magnet Count; P21 Pwm Start Speed - Vision Fitness T9800S Engineering Manual

DGF1J Upper Board: Engineering Guide
USER ENGINEERING MODE MENU
Address Description
P0 PWM MIN PWM value at min speed (0.5 mph)
SPEED
P1 PWM 1/2 PWM value at 1/2 max speed
MAX (6.4 mph/10.0 kph)
P2 PWM MAX PWM value at max speed (12.0
SPD mph/20.0 kph)
P3 (unused)
P4 ELV MIN Value at zero or minimum elevation (0%)
P5 ELV MAX Value at maximum elevation (15%)
P6 TREADMILL 0 – T9800 HRT
MODEL 1 – T9800 HRT INT
2 – T9800 S
P7 MAX WO Maximum program time
TIME
P8 WEIGHT Weight used for calories
P9 OP HOURS Accumulated hours
P10 OP DIST Accumulated distance
P11 (unused)
P12 (unused)
P13 ELV DIR Elevation pot inverter
P14 DISABLE ELV Toggles Elevation Errors off and on
ERRS
P15 SCROLL Sets speed of text scrolling
SPEED
P16 LUBRICATE Number of hours since last
DECK MSG lube/Message enable
P17 CLEAN Distance since last
TREADMILL MSG cleaning/Message enable
P18 (unused)
P19 MAGNET Magnet Count- number of speed
COUNT sensor pulses per belt roller revolution.
P20 EFF DIAMETER Effective Diameter
P21 PWM START PWM value at start speed
SPEED
Date of last revision: 11.06
Min.Value Default Value
1 34
111 167/173
250 333/346
10 50
150 205
0 0
15 99
80/36 150/68
0 0
0 0
yes yes
no no
1 3
0/OFF 0/OFF
0/OFF 0/OFF
1 26
57.1 (2) 67.8 (331) 127.0 (511)
2 31*
10
TREADMILL.UPPERBDENG.DGF1J.CVTM0033.CVTM0031.REV2
MaxValue Units
110 ticks
250 ticks
485 ticks
149 A/D ticks
255 A/D ticks
2
99 minutes
400/182 lbs/kg
6553.5 hours
65535 miles/km
no
Yes
5
0xffff/on hours
0xffff/on miles/km
48
mm
75 ticks