Lift Motor Hours; Lubricate Deck Message; Clean Treadmill Message - Vision Fitness T9800S Engineering Manual

DGF1J Upper Board: Engineering Guide
3.5 MAINTENANCE
MAINTENANCE MENU
• Total Hours
• Total Distance
• Belt/Motor Hours

• Lift Motor Hours

• Lubricate Deck Message

• Clean Treadmill Message

• Error Log
• Exit
3.5.1 TOTAL HOURS
The total accumulated treadmill operating hours is displayed in the speed window.
Press and hold the
"START"
3.5.2 TOTAL DISTANCE
The total accumulated treadmill operating distance is displayed in the speed window.
Press and hold the
"START"
3.5.3 BELT/MOTOR HOURS
The total accumulated treadmill belt/belt motor operating hours is displayed in the speed window.
Press and hold the
"START"
3.5.4 LIFT MOTOR HOURS
The total accumulated treadmill elevation motor operating hours is displayed in the speed window.
Press and hold the
"START"
3.5.5 LUBRICATE DECK MESSAGE
The enable lubricate treadmill deck message status is displayed in the speed window.
Use the keys to toggle enable status: OFF/ON.
"SPEED"
Total accumulated hours since last lube is displayed in the elevation window.
Press and hold the
"START"
3.5.6 CLEAN TREADMILL MESSAGE
The enable clean treadmill deck message status is displayed in the speed window.
Use the keys to toggle enable status: OFF/ON.
"SPEED"
Total accumulated hours since last cleaning is displayed in the elevation window.
Press and hold the
"START"
TREADMILL.UPPERBDENG.DGF1J.CVTM0033.CVTM0031.REV2
key for 3 seconds to reset accumulated hours to zero.
key for 3 seconds to reset accumulated distance to zero.
key for 3 seconds to reset accumulated hours to zero.
key for 3 seconds to reset accumulated hours to zero.
key for 3 seconds to reset accumulated hours to zero.
key for 3 seconds to reset accumulated hours to zero.
21
Date of last revision: 11.06