Error Message "E1, E2, E3, E4, E5 Or E6" On Console - Vision Fitness Vision series Service Manual

Error Message " E1" or "E2"
Possible cause:
1. EEPROM error.
2. PCB is damaged.
Fix:
1 Re-calibrate the parameters from P0 to P6 then check again.
2. Replace PCB.
Error Message " E3" on the Console
Possible cause:
1. Speed is out of range.
2. PCB is damaged.
Fix:
1. Enter the engineering mode to re-calibrate the speed.
2. Replace PCB.
6-7 Revision: 1.0 Date: 2001-06-01