Displaying And Maintaining Qos Policies - H3C S5120-EI Series Configuration Manual

QoS policies cannot be applied to dynamic VLANs, for example, VLANs created by GVRP.
Do not apply a QoS policy to a VLAN and the ports in the VLAN at the same time.
Applying the QoS policy globally
You can apply a QoS policy globally to the inbound or outbound direction of all ports.
Follow these steps to apply the QoS policy globally:
To do...
Enter system view
Apply the QoS policy globally
A QoS policy containing any of the nest, remark customer-vlan-id, and remark service-vlan-id
Actions cannot be applied globally.

Displaying and Maintaining QoS Policies

To do...
Display information about a class
and the corresponding actions
associated by a policy
Display information about the
policies applied on a port
Display information about a traffic
behavior
Display information about a class
Display information about QoS
policies applied globally
Display information about QoS
policies applied to VLANs
Use the command...
system-view
qos apply policy policy-name
global inbound
Use the command...
display qos policy user-defined
[ policy-name [ classifier
classifier-name ] ]
display qos policy interface
[ interface-type interface-number ]
[ inbound ]
display traffic behavior
user-defined [ behavior-name ]
display traffic classifier
user-defined [ classifier-name ]
display qos policy global [ slot
slot-number ] [ inbound ]
display qos vlan-policy { name
policy-name | vlan [ vlan-id ] }
[ slot slot-number ] [ inbound ]
3-8
Remarks
—
Required
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view