Mac Address; Console Port; Factory Defaults - 3Com 3800 User Manual

1-10 C 1: S
HAPTER WITCH

Factory Defaults

3800 O
VERVIEW

MAC Address

This label shows the unique Ethernet MAC address assigned to this
device.

Console Port

The console port (9-pin, "D" type connector) is used to connect a
terminal and to carry out local out-of-band management.
Table 1-3 shows the factory defaults for the Switch 3800 features.
Table 1-3 Switch 3800 Factory Defaults
Item
Port status
Default user account
Console port configuration
SNMP read community string
SNMP write community string
RMON history session
RMON alarms
PACE
Virtual LANs
802.1Q tagging
BOOTP
Spanning Tree Protocol
IP Routing
Forwarding database aging
period
RIP Protocol
Autonegotiation
Default Setting
Enabled on all ports
admin with no password and user with no
password
9600 baud, eight data bits, one stop bit, no
parity, XON/XOFF flow control enabled
Public
Private
Enabled
Enabled
Send trap if load is greater than 75% of
available bandwidth
Send trap if there are more than 10 errors in
1,000 packets
Recognition disabled
One VLAN named default; all ports belong to the
default VLAN; no protocol filter used.
All packets are untagged on the default VLAN
(default)
Enabled on the default VLAN (default)
Disabled; one defined as "s0"
Disabled
30 minutes
Disabled
On