Protocol Commands; Fdb Commands - 3Com 3800 User Manual

Protocol Commands

Table 4-8 Protocol Commands
Command
show protocol {<protocol_name> | all}
create protocol <protocol_name>
delete protocol <protocol_name>
config protocol <protocol_name> add
<protocol_type> <hex_value>

FDB Commands

Table 4-9 FDB Commands
Command
show fdb {all | <mac_address> | vlan
<name> | <portlist> | permanent}
clear fdb {all | <mac_address> | vlan
<name> | <portlist> }
(continued)
Table 4-8 describes protocol commands.
Table 4-9 describes FDB commands.
Switch 3800 Commands
Description
Allows you to display protocol-related information,
including:
Protocol name
List of protocol fields
List of VLANs that use this protocol
Allows you to create a user-defined protocol.
Allows you to remove a protocol.
Allows you to configure a protocol filter. Supported
protocol types include:
EtherType
LLC
SNAP
Description
Displays the forwarding database contents including
MAC address, associated VLAN, port, age of entry
configuration method, and status. Providing one of the
options acts as a filter on the display. Providing a VLAN
name displays all entries for the VLAN. Use the MAC
address to locate a specific entry in the FDB.
Allows you to clear dynamic FDB entries that match
the filter. Use the keyword "all" to clear all dynamic
entries.
4-11