Logging Commands - 3Com 3800 User Manual

4-22 C 4: C
HAPTER OMMANDS

Logging Commands

Table 4-18 Logging Commands
Command
show log config
show log {<priority>} {<subsystem>}
clear log
config log display {<priority>}
{<subsystem>}
(continued)
Table 4-18 describes Switch logging commands.
Description
Displays the log configuration, including the syslog
host IP address, the priority level of messages being
logged locally, and the priority level of messages being
sent to the syslog host.
Displays the current snapshot of the log. Options
include:
priority — Filters the log to display message with the
selected priority or higher (more critical). Priorities
include critical, warning, and informational. If not
specified, informational priority messages and
higher are displayed.
subsystem — Filters the log to display messages
associated with the selected Switch subsystem.
Subsystems include Syst, STP Brdg, SNMP, Telnet,
VLAN, and Port. If not specified, all subsystems are
displayed.
Allows you to clear the log.
Allows you to configure the real-time log display.
Options include:
priority — Filters the log to display message with the
selected priority or higher (more critical). Priorities
include critical, warning, and informational. If not
specified, informational priority messages and
higher are displayed.
subsystem — Filters the log to display messages
associated with the selected Switch subsystem.
Subsystems include Syst, STP Brdg, SNMP, Telnet,
VLAN, and Port. If not specified, all subsystems are
displayed.