3-18
C
3: A
HAPTER
CCESSING
Table 3-8 Port Commands (continued)
Command
disable smartredundancy <portlist>
show port <portlist> config
show port <portlist> stats
show port <portlist> errors
show port <portlist> collisions
show port <portlist> packet
show port <portlist> util
T
S
HE
WITCH
Description
Allows you to disable the SmartRedundancy feature. If
the feature is disabled, the Switch changes the active
link only when the current active link becomes
inoperable.
Displays state, link status, speed, and autonegotiation
setting for each port.
Displays port information including physical layer
configuration and statistics.
Displays error information for one or more ports.
Displays real-time collision statistics.
Displays a histogram of packet statistics for one or more
ports.
Displays port utilization by percentage, bytes per
second, or packets per second. Use the space bar to
toggle between percentage, bytes per second, or
packets per second. Use the clear counters command to
reset values.