Protocol Information - 3Com 3800 User Manual

5-14 C 5: V
HAPTER IRTUAL
LAN (VLAN )
S S
Status for each port
Enabled/disabled
Tagged/untagged

Protocol information

IP address
STPD information
Sample output from this command is as follows:
3C16910:7 # sh vlan all
VLAN "Default" created by user
Tagging:
IP:
STPD: Domain "s0" is not running spanning tree protocol.
Protocol:
Ports:
Untag: 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
21 22 23 24 25
VLAN "green" created by user
Tagging:
IP:
STPD: Domain "s0" is not running spanning tree protocol.
Protocol:
Ports:
Untag: 1
Tagged: 7
To display protocol information, use the following command:
show protocol {<protocol> | all}
802.1Q Tag 1
192.207.37.214/255.255.255.0
Match all unfiltered protocols.
23. (Number of active port=1)
802.1Q Tag 11
Not configured
Match all unfiltered protocols.
3. (Number of active port=0)
2