Deleting And Resetting Vlans - 3Com 3800 User Manual

Deleting and
Resetting VLANs
Table 5-2 VLAN Delete and Reset Commands
Command
delete vlan <name>
delete protocol <protocol>
unconfig vlan <name> ipaddress
Sample output from this command is as follows:
show protocol all
Protocol Name
-----------------
IP
ipx
netbios
decnet
This show command displays protocol information, including the
following:
Protocol name
List of protocol fields
VLANs that use the protocol
To delete a VLAN, or to return VLAN settings to their defaults, use the
commands listed in Table 5-2.

Deleting and Resetting VLANs

Type Value
---- -----
etype 0x0806
etype 0x0800
etype 0x8137
11c 0xf0f0
etype 0x6004
etype 0x6003
Description
Allows you to remove a VLAN.
Allows you to remove a protocol.
Allows you to remove the IP address.
5-15