Indoor Unit; To Unpack The Indoor Unit; To Remove The Accessories From The Indoor Unit; About The Units And Options - Daikin EGSQH10S18AA9W Installer's Reference Manual

3.2

Indoor unit

3.2.1

To unpack the indoor unit

3.2.2 To remove the accessories from the
indoor unit
1 Remove the screws at the top of the unit.
2 Remove the top panel.
4×
3 Remove the accessories.
a b c
1× 1× 1×
e f g
1× 1× 1×
a General safety precautions
b Addendum book for optional equipment
c Installation manual
d Operation manual
e Remote outdoor sensor
f User interface kit cover
g Multilingual fluorinated greenhouse gases label
h 2 screws for fixing the user interface.
4 Reinstall the top panel.
EGSQH10S18AA9W
Daikin Altherma ground source heat pump
4P351748-1D – 2016.02
d
1×
h
1×

4 About the units and options

4 About the units and options
4.1 Overview: About the units and
options
This chapter contains information about:
▪ Identifying the indoor unit
▪ Combining the indoor unit with options
4.2

Identification

NOTICE
When installing or servicing several units at the same time,
make sure NOT to switch the service panels between
different models.
4.2.1

Identification label: Indoor unit

Location
Model identification
Example: E GS Q H 10 S 18 AA 9W
Code
E European model
GS Ground source heat pump
Q Refrigerant R410A
H Heating only
10 Capacity class
S Integrated tank material: Stainless steel
18 Integrated tank volume
AA Model series
9W Backup heater model
4.3 Possible options for the indoor
unit
User interface (EKRUCBL*)
The user interface and a possible additional user interface are
available as an option.
The additional user interface can be connected:
▪ To have both:
▪ control close to the indoor unit,
▪ room thermostat functionality in the principal space to be
heated.
▪ To have an interface containing other languages.
Following user interfaces are available:
Description
Installer reference guide
7