Chapter
11
11
Access Rule
11.1 Date Type
Click the "Access Control" "Access Rule," select "Date Type" to enter the date setting
page; see the figure below:
Figure 11-1 Date setting
The controller supports the setting of 10 date types, including from Sunday to Saturday (7
types), user-defined 1, user-defined 2, and user-defined 3, of which Sunday to Saturday are
automatically set according to the calendar and user can define the user-defined 1, user-
defined 2 and user-defined 3 as required.
In this manual, the user-defined 1, user-defined 2 and user-defined 3 are all regarded as
holidays. Holiday setting refers to the three date types. The EverFocus controller supports
255 holiday settings.
11.1.1 Add Date
In the operating button region, click the "Add" button, then the dialog box reading "Add
Date" pops up.
Figure 11-2 Add date
81