Door Setting; Set Open Time - EverFocus EBC980R User Manual

D/mifare finger vein single-door controller
Table of Contents

Advertisement

3.7 Door Setting

EBC980R controls a single door. The user can set the door open time, door over time and
door open mode. In the "System Setting" main menu, scroll to the "Door Setting" menu
item and press "#" to enter the "Door Setting" submenu. Scroll to select different menu
items.

3.7.1 Set Open Time

The door open time is the door open time after the valid card is swiped or the door open
button is pressed and the default value is 3 seconds. The maximum time set on the
controller is 999 min 59s. If the door open button is pressed, the door will open. The door
open time is started after the door open button is released. Scroll to the "Set Open Time"
menu item and press "#" to enter its interface.
For setting the minutes, input three digits in the range of 0-999, and for setting seconds,
input two digits in the range of 0-59. Press "#" to confirm and the setting will take effect.
Press "*" to exit and the setting will not take effect.
Open Time Setting
Over Time Setting
Door Access Mode
Timeout Time
Door Open Time
000 Min 03 Sec
Cancel
Direction
OK
32

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ebc980m

Table of Contents