Table of Contents
Advertisement
Figure 6-8 Local Server
Click the IP type as in the above figure, select static or dynamic type, input IP, subnet mask
and gateway in the textbox, confirm and click the "OK" button. The page will display this
prompt dialog box:
Click "OK" again and re-log in to the controller using the changed IP address.
Click the "Reset" button to read and display the network settings in the current controller in
the page input box.
Click the "Synchronize with Local Time" button and the time of the controller will
synchronize with the local time. The required time can also be set by the user. Click the
"Set" button to save the time settings.
Select the required time zone or the time zone where the location is located, click the "Set"
button to complete the controller time zone settings.
6.6 System Upgrade
The embedded software in the controller can be upgraded to the latest version through
system upgrade.
The system upgrade is divided into online upgrades and local upgrades.
Click the system main menu "System" "Basic Setting" "System Upgrade" to enter the
system upgrade page. See Figure 6-9. By default, the online upgrade page will show up.
61
Advertisement
Table of Contents
