Table of Contents
Advertisement
Initial card number: Input the card's internal code. The three card types supported by the
controller include: Decimal, hexadecimal, and nnn-nnnnn. Taking the 8-digit decimal card
internal code as an example, add 0 in front of the internal code if the internal code is less
than eight digits.
The ID card internal code is in the form of Wiegand 26, i.e. 26 bits. Discarding the parity
check of the first bit and last bit, the remaining 24 bits are the true internal code of the card
after converting it to the decimal system.
The user can read the card number through the printed on the card.
The user can read the card number from the illegal card swiping record after swiping
the card on the card reader of the on-line controller.
The user can obtain the card number by adding the card to the system card reader of
the controller and downloading the card data of the controller.
For the cards with consecutive numbers, the cards can be added in batch by inputting the
initial card number and the card quantity.
12.1.2 Edit/Change Card
In the card setting page, select the column in which the card to be changed is located, click
the "Edit" button and then the card changing dialog box pops up; see the figure below:
Change the related attribute of the card, click the "Save" button and click the "Return"
button after the progress bar reaches 100%. Then the dialog box disappears.
Figure 12-3 Edit card
91
Advertisement
Table of Contents
