Reset Network; System Information; System Operation Description; Single Card Access Mode - EverFocus EBC980R User Manual

3.10.3 Reset Network

Select the "Reset Network Setting" item and press the function key "#" or numerical keys
"5" or "6" to enter the setting menu.
Press "#" to confirm "Reset Network Setting", and press "*" to exit.

3.11 System Information

In the main menu of the System Setting, select the "System Info" menu item and press "#"
to enter the System Info display interface. Display the hardware version of the current
controller, amount of stored user cards and total amount of recorded events.

3.12 System Operation Description

3.12.1 Single Card Access Mode

If the swiped card has the corresponding user name, after successful authentication, the
user name information of the card holder and "Access granted" will be displayed. If the user
name information is not set, the card number of the swiped card will be displayed. If the
card is not available in the system or the card has no door open function, "Access denied"
will be displayed.
Are you sure?
[#] to continue
Version: 1.0.0-2
MAC: _ _:08:43:22
Cards:
Events: 0003098
0009251826
Access granted
Welcome
00100
2015-02-01
Access denied
Welcome
40