Table of Contents
Advertisement
Arm Delay: The controller will be in the arm status after the setup time. Minimum time is 5
sec.
Action Doors: This function will be enabled when the Fire Alarm is selected. Select Open
Door or Close Door.
Click the "Save" button to finish the operation.
10.1.3 Alarm Setting
In the alarm setting page, the user can configure whether the controller alarm output is
triggered in case of an event alarm of the controller and configure the alarm output time.
Figure 10-3 Alarm time
Select an Output Port and set up the alarm duration time. Click the "Save" button to finish
the operation.
80
Advertisement
Table of Contents
