Table of Contents
Advertisement
3.6.2.2 Delete All Cards
In the "Delete Cards" submenu, scroll to the "Delete All Cards" menu item and press "#" to
enter the "Delete All Cards" interface. The system will request the user to reconfirm
whether to delete all cards. Press "#" to delete all cards.
Caution: This operation will delete all card information from the controller.
3.6.3 Set Card Properties
In the "Card Setting" menu, scroll to "Set Card Properties" menu item and press "#" to enter
the "Set Card Properties" interface. The system will prompt the user to input the card
number. If the card does not exist in the system, the system will prompt "Unknown Card."
Add Card
Delete Card
Set Card Properties
Synchronize Vein Data
After inputting the card number, press "#" to enter the card attribute setup menu. Each card
has seven attributes that can be changed. Scroll to select the menu item to be set. And
press #" to enter the setup interface of the corresponding item.
Are you sure?
[#] to continue
Input Card No.
ID#: _ _ _ _ _ _ _ _
Status Setting
Administrator
ARM Setting
1
-person-in
st
Updating Data...
Please Wait...
Unknown Card
PIN Setting
Modify ID
Modify PIN
27
Advertisement
Table of Contents
