Table of Contents
Advertisement
Delete Card: Select the tab of the card to be deleted, click the "Delete Card" button to
delete the card.！Note: This operation is real-time processing.
Card Validity: Indicates whether the registered card is activated. Check this item to activate
the card. The other attributes of the card may not act until the card is activated. The card
will be invalid in case of not checking.
First Card Door Open: It indicates that the card held by the Cardholder is the first card and
is used for opening the door when setting normally opened function of the door region. If
the controller 0001 sets the door to be normally opened at a.m. 9:00-11:00, during this
period of time, the Cardholder holding the card with the first card attribute swipes the card
on the card reader under the controller to activate the normally opened state of the door in
the corresponding door region.
Arm/Disarm: It indicates whether the cardholder has the authority to set up/withdraw
protection and reset alarms on the selected controller. Checking this item will activate the
protection setup function of the card, and the cardholder will has the authority of
protection setup.
PIN Enabled: It indicates whether the personal password is activated. If the check box for
using password is checked, the password setting of the cardholder will be activated. The
cardholder can set an eight-digit door open password.
Force PIN: The duress password is used for raising an alarm when the cardholder opens the
door under duress and is only valid when the door is set to open with a password. The
duress password has 2 digits. In case of using the duress password, first input the first 6
digits of the normal password and then input the duress password and confirm, then the
alarm is generated and the door is opened.
Check Expire: If the card validity period is checked, it indicates that the card can be used
only in the validity period and cannot be used to enter any door region out of the validity
period. Click the input box with the mouse, then a time selection dialog box pops up. The
time of the validity period is in increments of minutes.
Private Schedule: Among all of the three rules of the card, the order of priority is: Card
design > Control group scheme > door design, with the priority from high to low. The design
selected from the pull-down menu of the card design is the control group scheme (non-
control group).
Access Group: The setting of the Access Control authority. The system allocates 2048 Access
Control authority for all the cardholders and sets different Access Access Rule for different
User Groups.
When all the information is filled in and the card setting is finished, click "OK" button, then
the system will display a dialog box reading, "Added successfully."
68
Advertisement
Table of Contents
