Table of Contents
Advertisement
2.6 Connecting Finger Vein Controller and Computer
2.6.1 Connection with Computer via TCP/IP Interface
EverFocus EBC980 series finger vein controller can work independently, EBC980 has
built-in server, and users can visit the built-in management system page directly
through any computer. EBC980 can also work with computer on-line via TCP/ IP and
work as common controller among EverFocus series access control software. Access
control software can conduct all the setting and management to it.
Figure 2.12 Connection of Finger Vein Controller with Computer
2.7 Reset Controller
Before powering on the finger vein controller, reconfirm that all wires are connected
correctly. If you want to restore to factory settings, press on the reset switch and power
on until the system of the finger vein controller starts up.
Resetting the finger vein controller will completely remove the
！Important
users' information, event records and all systematic settings in the controller. The
operation is unrecoverable, please proceed with caution.
TCP/IP
Reset
Figure 2.13 Reset Switch
13
Advertisement
Table of Contents
