Table of Contents
Advertisement
11.3.3 Set Group Schedule
Click one group schedule in the group schedule list and click the "Edit" button to enter the
group schedule setting page; see the figure below:
Figure 11-8 Edit control group scheme
By default, the date time periods allow free entry. In case it is required to respectively set
the date time periods in the schemes, in the control scheme setting page, left click
"Datesetting" in the selected date type, then the following time period setting page pops up:
Figure 11-9 Set time period and authentication mode
Input times in the start time and end time, select the door entry mode during the time
period and then click the "Apply" button to finish the setting. After setting and changing all
the entry mode, click the "Save" button and click the "Return" button to return the scheme
setting page.
After setting the date time period of the control scheme, click the "Save" button to save the
setting. See the figure below:
Figure 11-10 Update data
86
Advertisement
Table of Contents
