Table of Contents
Advertisement
Unlock Duration: Set up the duration time for the door to be opened when an open door
request is permitted.
Held Open Duration: The delay time (unit: S) for triggering a door open timeout alarm
event when the actual door open time exceeds the set time.
Input Time: The time allowed for inputting a password when opening the door or carrying
out other operations with passwords. If the time is longer than the waiting time, the input
menu will be canceled and return to the main setup menu.
Outcome: Indicates if the card reader is in door entry position or door exit position. If the
item is checked, it indicates that the card reader is in the door exit position.
Greeting in Screen: Input the greeting text for the screen on the reader. Up to 40 characters
can be inputted.
Card Switch: After opening the door using the first card, the status of the door is normal or
normally opened. The checked box indicates to trigger.
Date Format: Select a date format.
Daylight Saving: Check to enable the Daylight Saving function. You can further set up the
start or end time of the daylight saving time.
Click the "Save" button to finish the operation.
10.1.2 Alarm Input
Figure 10-2 Alarm Input
Name: Input a name for the alarm input.
Fire Alarm: Indicates this is a fire alarm input.
Input Mode: Select from Disabled, Normal Open or Normal Close.
Output Mode: Select from Launch mode 1, Launch mode 2, Launch mode 1.2 or No output.
Alarm Duration: Set up the duration time when an alarm has been triggered. Minimum
time is 5 sec.
79
Advertisement
Table of Contents
