Table of Contents
Advertisement
In normal condition, if you press key "#", the system will require the user to input the
system managing password.
The factory default password is 00000000. In order to secure the controller,
！Important
change the password after the first login and keep the password in a safe place.
After inputting the password, press key "#" to confirm. In case that wrong passwords are
input for three times, the system will lock the keypad automatically for one minute. Pressing
the keypad again, the display will show "Keypad is Locked!", and the keys don't work at the
time.
3.3 Enter Menu Setting After Verification
Input the right system password, press "#". If there is no administrator in the system, enter
system menu directly after inputting the right password; if there is administrator, verify the
administrator first, the display of the controller shows as the following Figure:
At the moment, you can sweep the administrator's card or input the ID of administrator or
press in the administrator's finger vein, when the administrator inserts his/her finger, it
shows:
SYS Password
_ _ _ _ _ _ _ _
Cancel
OK
2015-02-26
MON 09:38
Keypad is Locked！
Welcome！
Please place admin
finger......
＿＿＿＿＿＿＿＿＿
16
Advertisement
Table of Contents
