Single Pin Access Mode; Finger Vein + Pin Mode - EverFocus EBC980R User Manual

3.12.2 Single PIN Access Mode

To activate the Single PIN access mode, the controller has to be set up with "Finger or PIN"
in the Door Setting < Door Access Mode menu.
In the main interface, press any numerical key and the PIN input interface will show up.
The user has three chances to enter the correct password. If all the three inputs are wrong,
"Access denied" will display. If the password is correct, "Access granted" will display. If the
card number is not displayed and "********" is shown on the screen, the door open when
single password is successful.

3.12.3 Finger Vein + PIN Mode

After inserting a finger, the "Input PIN" screen displays. Input the PIN code and then insert
your finger.
Input PIN:
_ _ _ _ _ _ _ _
Input PIN:
_ _ _ _ _ _ _ _
2015-02-01
Access denied
Welcome
Press your finger...
********
Access granted
Welcome
00xxxxxxxxxx
Access granted
Welcome
41