Power Supply; Turning On The Machine; Turning Off The Machine - Konica Minolta Bizhub C353P User Manual

Before using the machine
1.2

Power supply

1.2.1

Turning on the machine

1
Set the power switch to "n".
2
Check that the display panel is turned on.
!
Detail
When the machine is turned on, the printer starts up and the message "Now warming up" appears. After
the message "Ready to Print" appears, a print job can be received.
The default settings, which are those that are selected immediately after the machine is turned on, can
be changed. For details, refer to
The factory defaults settings are the settings that were selected when this machine was sent from the
factory.
Note
Warming-up time is within 75 seconds at an ambient temperature of 73.4 °F (23 °C).
1.2.2

Turning off the machine

1
Set the power switch to "o".
2
Chack that the display panel is turned off.
Reminder
When the power switch is turned off, then on again, wait at least 10 seconds to turn it on after turning
it off. If there is no wait period between turning the power switch off, then on again, the machine may
not function properly.
C353P
"Settings for control panel" on page 8-2.
1-15
1