Printer Settings - Konica Minolta Bizhub C353P User Manual
Multifunctionall print system
Hide thumbs
Also See for Bizhub C353P:
- Service manual (844 pages) ,
- User manual (554 pages) ,
- Product manual (57 pages)
Table of Contents
Advertisement
Settings for control panel
Menu
TCP Socket
Detail Settings
Note
The parameters for [TCP/IP], [HTTP Server], [SNMP], [AppleTalk], and [Bonjour] are displayed when
"ON" is specified for [TCP/IP Setting], [HTTPServerSetting], [SNMP Setting], [AppleTalkSetting], and
[Bonjour Setting].
If the network settings are changed, restart the machine to apply changes.
When the power is turned off, then on, turn off the power, wait at least 10 seconds, and then turn it on.
Otherwise, the machine may not operate correctly.
Printer Settings
Menu
USB Timeout
Network Timeout
Print XPS Errors
System Connection
Menu
OpenAPI Settings
CallRemoteCenter
Note
[OpenAPI Settings] - [SSL] are not displayed when the SSL certificate is not installed or "ON" is
specified for [EnhancedSecurity].
[CallRemoteCenter] is not displayed if center registration performed by selecting [Service Mode] - [CS
Remote Care] is not completed. For details, contact your service representative.
C353P
Description
TCP Socket
Specify settings for using the TCP Socket function.
TCP Socket ASCII
Specify settings for using the TCP Socket (ASCII)
function.
Network Speed
Select the operating speed.
TimeAdjustmentSet
Specify settings for the NTP server for which the time
is corrected.
When InvalidCert.
Specify the operation when the validity period for the
received certificate has expired.
If "Continue" is selected, processing continues even if
the date of the certificate is invalid.
If "Delete Job" is selected, the job is deleted if the date
of the certificate is invalid.
Ping Confirmation
Sends a ping to confirm a response.
Description
Specify the length of time until a transmission timeout occurs.
Specify the length of time until a transmission timeout occurs.
Specify whether to print the error message when an error occurs during
XPS printing.
Description
Access Setting
Select whether or not OpenAPI access is enabled.
Enable SSL
Select whether or not SSL is enabled.
Authentication
Select whether or not user authentication is per-
formed.
PortNumberSetting
Specify the port number.
→
Transmits the status of the machine to the center.
8
Default
Setting
–
–
Auto Set-
ting
–
Continue
–
Default
Setting
60sec
60sec
ON
Default
Setting
Allow
ON
–
50001
8-23
Advertisement
Table of Contents
Troubleshooting
