Selecting And Connecting The Printer (Os 10.2 And 10.3); Specifying The Rendezvous Settings - Konica Minolta Bizhub C353P User Manual

Installing the printer driver for Macintosh
6
Select "KONICA MINOLTA" in "Print Using", select the desired model from the list of models, and then
click the [Add] button.
If the selected printer is registered in the printer list, the setting procedure is completed.
Note
If the Installable Options window appears, proceed to change the option settings as necessary. For
details, refer to
4.2.3

Selecting and connecting the printer (OS 10.2 and 10.3)

In OS 10.2/10.3, this machine can be connected with Rendezvous, AppleTalk, LPR (LPD), or IPP.
After specifying the network setting for this machine, selecting this machine as the printer in Printer Setup
Utility or Print Center enables printing.

Specifying the Rendezvous settings

Specifying the Bonjour settings for this machine
Enable Bonjour in "Bonjour Setting", and then enter the Bonjour name.
!
Detail
For details on the Bonjour settings of this machine, refer to
Adding a printer
1
Select "HDD" - "Applications" - "Utility" where the driver was installed, and then double-click "Printer
Setup Utility" or "Print Center" to open it.
2
When the Add Printer dialog box appears, click the [Add] button. When the printer list appears, click
the [Add] button.
– If available printers have already been set up, the Add Printer dialog box does not appear.
3
Select "Rendezvous" for the connection method.
– If the printer is not detected, turn off this machine, then on again.
C353P
"Options" on page 6-3.
"Network settings" on page
4
2-2.
4-9