Setup - Konica Minolta Bizhub C353P User Manual

Authentication unit (Biometric type AU-101)
Reminder
PageScope Data Administrator ver. 3.0 or later must first be installed on the computer. For details on
the operating environment and installation procedure for PageScope Data Administrator, refer to the
User's Guide for the PageScope Data Administrator.

Setup

1
Turn off the machine with the power switch, and then disconnect this device from the machine.
2
Install BioDriver(USB-Driver).
Plug the cable from this device into the USB port on the computer.
The Found New Hardware Wizard starts.
3
Select "Yes, now and every time I connect a device", and then click [Next].
4
Insert the application CD-ROM included with this device into the CD-ROM drive of the computer.
5
Select "Install from a list or specific location (Advanced)", and then click [Next].
C353P
14
14-9