Printer Settings - Konica Minolta Bizhub C353P User Manual

Settings for control panel

Printer Settings

Menu
Basic Settings
Paper Settings
PCL Settings
PS Settings
XPS Setting
C353P
Description
PDL Setting Specify the printer description language as "Auto",
"PCL", or "PS".
Number of Copies Specify the number of copies to be printed (between
1 and 999).
OriginalDirection Select the orientation of the print image.
Spool Setting Select whether or not a spool is used.
• ON: If another job is received while a job is being
performed, the next job is saved on the HDD.
• OFF: The print data is not saved on the HDD.
Paper Size Switch Select whether or not paper size substitutions
A4<=>Letter and A3<=>Ledger are permitted.
Banner Sheet Select whether or not to print banner pages (front cov-
er pages) containing the name of the sender and the
subject of the print job.
BindingPos. Adjust Select whether to adjust the binding position for du-
plex printing.
• Finishing: All pages can be processed to an opti-
mum condition because the machine adjusts the
binding positions after receiving the print data.
• Productivity: Printing is performed efficiently be-
cause the machine processes data reception and
printing concurrently.
• ControlAdjustment: The machine follows the set-
tings specified in the printer driver without adjust-
ing the binding position.
Paper Tray Select the paper tray that is to be used.
Paper Size Select the size of paper that is to be used.
2-Sided Print Select whether or not pages are printed on both sides.
Binding Position Select the binding position for double-sided printing.
Staple Select whether or not pages are to be stapled.
Punch Select whether or not holes are to be punched in the
pages.
Banner PaperTray Select the paper tray used to print banner pages.
Font Setting Specifies the font with the font number.
For details on font numbers and corresponding fonts,
refer to the "Font List" on the following page.
Symbol Set Specify the symbol set to be used.
Font Size Specify the font size to be used.
Pitch Specify the number of lines per page.
CR/LF Mapping Specify the substitution method for printing text data.
• CR=CR LF=LF: No substitution is performed.
• CR=CRLF LF=LF: CR is substituted with CR-LF.
• CR=CR LF=CRLF: LF is substituted with CR-LF.
• R=CRLF LF=CRLF: Substitute with CR-LF.
Print PS Errors Select whether or not error information is printed when
an error has occurred during PS rasterization.
Set ICC Profile Select the default profile setting that is displayed in
the printer driver.
Verify XPS Sign. Specify a setting to perform or not to perform digital
signature verification in XPS printing. When "ON" is
selected for signature verification, the document with-
out a valid digital signature is not printed.
8
Default Setting
Auto
001
Portrait
ON
OFF
OFF
Finishing
Auto
8-1/2 × 11
OFF
Left Bind
OFF
OFF
Auto
000
Roman-8
Scalable Font -
12.00 point
Bitmap Font -
10.00 pitch
60Lines
CR=CR LF=LF
OFF
–
OFF
8-19