Loading Paper Into The Lct - Konica Minolta Bizhub C353P User Manual

Before using the machine
– Load letterhead paper so that the side to be printed on faces down.
How is curled paper loaded?
?
% Flatten the paper before loading it.
? How many sheets of paper and other media can be loaded?
% Do not load so many sheets of plain paper that the top of the stack is higher than the , mark.
4
Close tray 1.
!
Detail
If special paper is loaded, the paper type setting must be specified. For details, refer to
Menu" on page
Reminder
Be careful not to touch the film.
For details on selecting the size and type of paper loaded in tray 1/2/3/4, refer to
page 1-18.
To print on OHP transparencies, envelopes or postcards, use the bypass tray.
1.4.2

Loading paper into the LCT

0 If the [Power] is turned off, the LCT cannot be pulled out, even after the tray release button is pressed.
Be sure that the machine is turned on with the [Power].
0 LCT is an option.
1
Press the tray release button.
The LCT slides out from the main unit slightly.
C353P
8-17.
D C B A
1
"Paper Settings
"Paper" on
1-23