Smtp Authentication - Konica Minolta Bizhub C353P User Manual

PageScope Web Connection
9.19.5

SMTP Authentication

In Administrator mode of PageScope Web Connection, select the Network tab - "E-mail Setting" - "E-mail
TX (SMTP)".
Specify the following settings.
Item
SMTP Authentication
User ID
Password
Domain Name
Authentication Settings
!
Detail
A SMTP authentication method that is supported by the SMTP server and provided with the strongest
encryption strength is automatically selected from Digest-MD5, CRAM-MD5, PLAIN, and LOGIN.
If there is just one domain (realm) to which the user belongs, it is notified from the SMTP server at the
time of initial communication, and communication is automatically made using the domain name.
Therefore, no domain name setting on this machine is not required. If there are two domains or more
to which the user belongs, however, specify the domain name to which the user belongs.
9.19.6 POP before SMTP
POP before SMTP
In Administrator mode of PageScope Web Connection, select the Network tab - "E-mail Setting" - "E-mail
TX (SMTP)".
Specify the following settings.
Item
POP before SMTP
POP before SMTP Time
!
Detail
If the POP server is different from the SMTP server, the POP server informs the SMTP server that it has
been logged in. Therefore, if the set POP before SMTP time is too short, messages may not be sent.
C353P
Definition
To perform SMTP authentication, select the "SMTP Authen-
tication" check box.
Specify the user ID for the SMTP authentication (up to 255
characters).
Specify the password for the SMTP authentication (up to 128
characters).
Specify the domain name for the SMTP authentication (up to
255 characters).
If the authentication method is Digest-MD5, the domain
name must be specified.
Specify whether to synchronize with user authentication.
When user authentication is performed, this item is dis-
played.
Definition
To perform POP before SMTP, select "ON".
Specify the time period to access the SMTP
server after logging in to the POP server.
Prior confirmation
Whether the sever re-
quests SMTP
Authentication method
Whether to synchronize
the user authentication
Prior confirmation
Whether the sever requires POP before
SMTP authentication
Whether the POP server is different from
the SMTP server
9
9-73