Installation Of The Printer Driver - Konica Minolta Bizhub C353P User Manual
Multifunctionall print system
Hide thumbs
Also See for Bizhub C353P:
- Service manual (844 pages) ,
- User manual (554 pages) ,
- Product manual (57 pages)
Table of Contents
Advertisement
Installing the printer driver for Windows
Note
For details on the TCP/IP settings and IPP settings of this machine, refer to
page
2-2.
To use IPPS printing, the certificate must be registered to this machine. For details, refer to
IPP print settings" on page
3.2.3
Installation of the printer driver
!
Detail
If the User Account Control window appears when installing on Windows Vista, click the [Allow] button
or the [Continue] button.
1
Insert the printer driver CD-ROM into the CD-ROM drive of the computer.
–
Check that the installer starts up, and then continue with step 2.
–
If the installer does not start up, open the printer driver folder on the CD-ROM, double-click
"Setup.exe", and then continue with step 3.
2
Click the "Printer Install" button.
The installer of the printer driver starts.
3
If you agree with all terms and conditions of the license agreement, click the [AGREE] button.
–
If not, the software cannot be installed.
–
You can change the display language of the installer using the box in the lower-left corner.
–
You can change the display language of the installation license agreement in the lower-right corner.
4
If the setup selection window appears, select "Install printers/MFPs", and then click the [Next] button.
The connected printers and MFP are detected.
–
If the printer is not detected, turn off this machine, then on again.
–
When turning off the power, then on again, wait at least 10 seconds before turning it on again.
Otherwise, this machine may not function properly.
–
When using Windows Vista, the IPPS connection can not be setup using the installer. For using IPPS
connection, setup the connection using the Add Printer Wizard. For details, refer to
connection (IPP or IPPS)" on page
5
Select this machine, and then click the [Next] button.
–
If the connection of this machine cannot be recognized, this machine is not listed. If this is the case,
select "Specify the Printer/MFP Except for the Above. (IP Address, Host Name...)", and then specify
this machine manually.
C353P
2-12.
3-21.
3
"Network settings" on
"Specifying
"Network
3-5
Advertisement
Table of Contents
Troubleshooting
