Sound Mode - Bang & Olufsen BeoVision 14-40 User Manual

If you have selected Manual setup, you must select a control type.
To operate non-Bang & Olufsen products with a Bang & Olufsen remote control, attach a
Bang & Olufsen IR-transmitter to the products. Select IR-blaster if the IR-transmission
takes place via an IR-blaster. Select Plug if the IR-transmission takes place via a cable
plugged into the product.
Modulation mode
If you have selected Manual setup, and set the control type to Plug, you must select a
modulation mode. Select Modulation on if the connected product requires a modulated
signal. Select Modulation off if the connected product requires an un-modulated signal.
For more information, contact your Bang & Olufsen retailer.
Standby options
Set up when the product should switch off.
Off at TV standby: The connected product should switch off when you switch
off the television.
Off at source change: The connected product should switch off when you select
a different source available in your system.
Always on: The connected product should remain on at all times. This is useful if
the product has a very long start-up time.
Manual control: Switch the connected product on and off manually.
The connected product is now ready for use and you must select Finish.

Sound mode

Set a sound mode for the source. The television has several sound modes optimised for
different types of programmes and sources. However, if you wish, you can adjust the
values in the sound modes to your liking.
Automatic: Adapts to the selected source or the input received. If, for example,
you are watching a movie, the sound mode for movie will be used. This also
means that if you have adjusted the Movie sound mode, your adjustments are
included.
Movie: For use when watching movies, either from DVD or Blu-ray, streaming
sources or television broadcasts.
Game: For use for audio with game consoles.
Speech: For signals where increased speech intelligibility is wanted, for example,
television news programmes.
Drama: Primarily, for use when watching television broadcasts. Timbre settings
are flat and bass management is active.
Sports: For use when watching broadcasts of sports events.
Music: For use with music sources, either with or without accompanying video.
Night listening: For situations where it is desirable to hear all components of the
audio signal without large jumps in dynamics or bass.
Custom: Make your own specific sound mode with the sound adjustments you
prefer. This sound mode can also be renamed.
For more information about setting up sound modes, press the red button in the on-
screen help and find 'Sound settings'.
22