Connect Digital Sources - Bang & Olufsen BeoVision 14-40 User Manual

L/R IN
Left and right line input.
HDMI IN 1-2
The High Definition Multimedia Interface allows you to connect many different sources,
such as set-top boxes, multimedia players, Blu-ray players, or a PC.
USB ()
For connection of a USB device to browse digital photos, video or music files. If you
connect a USB HDD or SSD, you can use it as an external hard disk recorder.
AERIAL
Aerial input socket for a digital aerial/cable TV network or for an analogue TV signal.
SAT 1-2 (Satellite)
Aerial input sockets for a digital satellite signal.
 Ethernet
For connection to the Internet. For access to the Internet, Smart TV, software updates
and PUC and app downloads.
Make sure the cable connection between the product and the router does not exit the
building to avoid contact with high voltage.
It is strongly recommended that you set your television to update system software
automatically, press the red button in the on-screen help and find
 Mains supply
Connection to the mains supply.

Connect digital sources

Connect external HDMI sources, such as a set-top box, computer or game console. All
products connected to the television can be configured. For more information, press
the red button in the on-screen help and find
Depending on the product you connect to the television, different cables and maybe also
adaptors are needed. If you have more than one type of products that need a PUC
socket, you must buy an extra PUC cable. Cables and adaptors are available from your
Bang & Olufsen retailer.
Connect a digital source
1. Connect the cable to the appropriate socket on the digital product.
2. Run the cable to an HDMI IN socket on the television.
3. To enable operation of the digital product with your Bang & Olufsen remote
control, connect an IR-transmitter to one of the PUC sockets and attach it to the
IR-receiver of digital product. Press the red button in the on-screen help and find
'IR-transmitters' for more information.
4. Follow on-screen instructions to configure the source.*
*When selecting Game console as source, the picture mode Game is activated as default
'Auto system
'Set up a source'.
updates'.
17