Set Up Your Television; Set Up Your Television - Introduction; Placement; Handling - Bang & Olufsen BeoVision 14-40 User Manual

Set up your television

Set up your television - introduction

The television has several placement options. Guidelines for placement and connection
must be followed.
To ensure proper ventilation, allow enough space around the screen. At overheating
(flashing standby indicator and an on-screen warning), switch the television to standby,
do not disconnect from the mains, in order for the television to cool down. You cannot
operate the television during this time.
If the front screen glass should crack or chip, or if it should be damaged in any way, it
must be replaced immediately, as it could otherwise cause injury. You can order
replacement front screen glass from your Bang & Olufsen retailer.

Placement

The television has several placement options.
Refer to www.bang-olufsen.com for available stands and wall brackets or contact your
Bang & Olufsen retailer. Due to the weight of the television, any moving or lifting of the
television should be performed by qualified personnel – using the proper equipment.

Handling

The television is not designed to stand on its own. It must be supported by the packaging
until mounted. To prevent injury, use Bang & Olufsen approved brackets or stands only!

Stands and wall brackets

11