Play A Recording - Bang & Olufsen BeoVision 14-40 User Manual

1. Press TV, then  or  to bring up Recordings.
2. Press the centre button to bring up the list of recordings.
3. Press LIST, then  or  to bring up Options in the BeoRemote One display.
4. Press the centre button to bring up the Options menu on the TV screen.
5. Highlight Schedule and press the centre button.
6. Highlight the tuner from where you want to record and press the centre button.
7. Highlight the channel to record from and press the centre button.
8. Highlight the day of the recording and press the centre button.
9. Set the start and end time of the recording. Select a parameter and use 
and  to set the hours and minutes.
10. Highlight Schedule and press the centre button to schedule the manual
recording.
The recording will appear in the list of scheduled recordings and reminders.
Watch TV while recording
Your television is equipped with two tuners. One tuner to watch a channel and a second
tuner to record another channel at the same time. However, the channels available for
watching during a recording depend on your TV setup for receiving channels.
Which channels can you watch during a recording...
If your television is set up with one CA Module, you can only watch free channels
and the channel you are recording. However, if you are watching a scrambled
channel when recording of a free channel has started, you can continue
watching the channel provided that you do not switch channel. While a free
satellite channel is recording, it is also possible to view antenna/cable channels.
If you use two CA Modules to decode scrambled channels and both Smart Cards
have identical viewing rights, you can watch all channels, including the one you
are recording.
If you use two CA Modules with non-identical viewing rights, make sure that the
viewing rights of the recorded channel is covered by the subscription on the
Smart Card inserted in COMMON INTERFACE slot 1.
In a single tuner setup, you can only record the channel you are watching.
For more information, press the red button in the on-screen help and find
digital channels'.

Play a recording

With a USB hard drive connected to your television, you can play and browse
through recordings of digital programmes.
The list of recordings shows information such as the storage capacity status, recording
titles and recording duration. Also, the date of the recording can be shown, and if you
highlight a recording a preview is shown.
To play a recording...
1. Press TV, then  or  to bring up Recordings.
2. Press the centre button to bring up the list of recordings.
3. Highlight the recording you need and press the centre button to start playback.
4. Press  to pause playback.
5. Press  or  to move backwards or forwards through the recording.* Press
repeatedly to change speed.
6. Press  again to stop playback.
7. Press  to resume playback.
8. To switch back to watch television, press TV and if necessary, select the
television source.
*You may need to press and hold  or  to move backwards or forwards.
'Smart Card for
35