Reinstall Channels - Bang & Olufsen BeoVision 14-40 User Manual

6. Select Update Digital Channels, then select Next.
7. Select Start to update the digital channels. This can take a few minutes.
8. Select Done when updating has completed.

Reinstall channels

You can reinstall all channels and leave all other TV settings untouched. If a pincode is
set, you will need to enter this code before you can reinstall channels.
1. Press , highlight Settings and press the centre button.
2. Highlight Channels and press .
3. Highlight Antenna/Cable Installation and press the centre button.
4. Enter your child lock pin code if necessary.
5. Select Search for Channels, then select Start.
6. Select Reinstall Channels, then select Next.
7. Select your country, then select Next.
8. Select the type of installation you want, Antenna (DVB-T) or Cable (DVB-C).
9. Select Next.
10. Select the type of channels you want, Digital and Analogue Channels or Only
Digital Channels.
11. Select Next.
12. Select Start to search for channels. This can take a few minutes.
13. Press  to go back one step or press  to leave the menu.
You can perform a full TV installation. The television is completely reinstalled. For
information on reinstallation of your television, press the red button in the on-screen
help and find 'Reinstall your television'.
DVB-T or DVB-C
DVB-T or DVB-C reception
During the channel installation, just before you search for channels, you select Antenna
(DVB-T) or Cable (DVB-C). Antenna DVB-T searches for terrestrial analogue channels
and digital DVB-T/T2 channels. Cable DVB-C searches for analogue and digital channels
available from a cable DVB-C provider.
DVB-C channel installation
For ease of use, all DVB-C settings are set to automatic. On some markets, the television
can enter the network ID of the provider automatically. If the DVB-C installation fails,
restart the installation and enter the network ID and/or network frequency values you
have received from the DVB-C provider when the television asks for them during the
installation. If your provider does not use Network ID, you should select Full Scan under
Frequency Scan in the DVB settings menu.
Channel number conflicts
On some markets, different TV channels (broadcasters) may have the same channel
number. While installing, the television shows the list with channel number conflicts. You
need to select which TV channel you want to install on a channel number with multiple
TV channels.
DVB settings
Network Frequency Mode: If you intend to use the fast Quick Scan method in
Frequency Scan to search for channels, select Automatic. The television will use
one of the predefined network frequencies (or HC - homing channel) as used by
most cable providers in your country. If you have received a specific network
frequency value to search for channels, select Manual.
Network Frequency: With the Network Frequency Mode set to Manual, you can
enter the network frequency value received from your cable provider here. To
enter the value, use the number buttons.
77