Adjust Picture And Sound Settings - Bang & Olufsen BeoVision 8 Reference Book

Hide thumbs Also See for BeoVision 8:
Table of Contents

Advertisement

14
Picture and sound settings are preset
from the factory to neutral values
which suit most viewing and listening
situations. However, if you wish, you
can adjust these settings to your liking.
Adjust picture brightness, colour or
contrast. Sound settings include volume,
bass and treble.
Store your picture and sound settings
temporarily – until your television is
switched off – or store them
permanently.
For information about how to change
the picture format, refer to the Guide
page 9.

Adjust picture and sound settings

Change brightness, colour or contrast
Adjust the picture settings via the PICTURE
menu. Temporary settings are cancelled
when you switch off the television.
> Press TV to switch on the television.
> Press MENU to bring up the TV SETUP menu
and press
to highlight PICTURE.
> Press GO to bring up the PICTURE menu.
> Press
or
to move through menu items.
> Press
or
to adjust the values.
> Press EXIT to store your settings until you
switch off the television, or ...
> ... press GO to store your settings permanently.
To temporarily remove the picture from the screen,
press LIST repeatedly to display P.MUTE on Beo4,
then press GO. To restore the picture again, press
any source button, such as TV.
PICTURE
.
.......
.......
BRIGHTNESS
.
.......
.......
CONTRAST
.
.......
.......
COLOUR
.
.......
.......
TINT
.
..........
....
HOR. SIZE
.
..........
....
HOR. POSITION
.
..........
....
VERT. POSITION
store
What's on the PICTURE menu ...
BRIGHTNESS ... Adjusts the picture brightness.
CONTRAST ... Adjusts the contrast level in the
picture.
COLOUR ... Adjusts the colour intensity in the
picture.
If a source, such as PC, is connected via the VGA
socket, the following options appear ...
HOR. SIZE ... Adjusts the width of the picture.
HOR. POSITION ... Adjusts the position of the
picture horizontally.
VERT. POSITION ... Adjusts the position of the
picture vertically.
For video sources using the NTSC signal, a further
option – Tint (colour shade or nuance) – will be
available for adjustment.
GO

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents