Speaker Group; Picture Off; Picture Mode; Picture Format - Bang & Olufsen BeoVision 14-40 User Manual

Speaker group

Select the speaker group to be used with this source.
For more information about setting up speaker groups, press the red button in the on-
screen help and find 'Sound settings'.

Picture off

Select whether the picture on the TV screen should switch off when you select an audio
source. Options are Timeout for the picture to switch off when a source has not been
operated for a while, Never for the picture to remain on and Always for the picture to be
switched off as soon as you select the source.
When the picture is switched off, you can still hear the sound of the source. If you have
selected Timeout and the picture has faded out, you can activate the picture again if you
press INFO or the centre button.

Picture mode

Select a picture mode to be used for the selected source.
General: Continuously and automatically adjusts the picture to the signal and the
viewing conditions.
Movie: Continuously and automatically adjusts the picture to the signal and the
viewing conditions. The colour temperature is set to 6500 K.
Game: Adjusts the picture to use the screen as a monitor for a connected game
console or PC. It minimises the video delay and add signal processing for optimal
picture.
Monitor: Adjusts the picture to use the screen as a monitor for PC application. It
minimises the video delay and neutralises all signal processing for unaltered
picture. The colour temperature is set to 6500 K.

Picture format

Set up a picture format to be used each time you activate the source.
Auto: Reduces black bars at the top and bottom. The picture is scaled without
changing the picture geometry. However, if a 4:3 source signals a wrong aspect
ratio, the picture will be stretched horizontally.
Auto wide: Reduces black bars at the top and bottom. Furthermore, the picture
is scaled and stretched horizontally to reduce black bars on the left and right
and to fill out as much of the screen as possible.
Note, that you can select additional picture formats in the Options menu found in LIST on
your remote control.
If Auto or Auto wide do not give a satisfactory result due to incorrect format information
from the source, you can select additional picture formats in the Options menu found in
LIST on your remote control. Select one of the formats Fixed A – Fixed D until you obtain
the optimum picture format. When you have selected Fixed C or Fixed D, you can
use  and  to move the picture up and down.
23