Re-Tune Channels - Bang & Olufsen BeoVision 14-40 User Manual

Re-tune channels

Re-tune channels – introduction
You can make your television find your TV channels and radio stations for you.
Channels and stations are updated automatically, but it is also possible to update
manually. Depending on your service provider, some settings are made automatically.
Antenna and cable installation
You can reinstall or update tuned terrestrial and cable channels which, for example, have
been moved by the broadcaster. Follow on-screen instructions.
Update channels
Automatic channel update
When you receive digital channels, your television is default set to update these
channels automatically.
New channels are stored in the Channels list and are marked with a  icon. Channels
without a signal are removed. The television must be in standby to update channels
automatically. You can switch off automatic channel update.
To switch off the automatic update...
1. Press , highlight Settings and press the centre button.
2. Highlight Channels and press .
3. Highlight Antenna/Cable Installation and press the centre button.
4. Enter your child lock pin code if necessary.
5. Select Automatic Channel Update.
6. Select Off.
7. Press  to go back one step or press  to leave the menu.
When new channels are found or if channels are updated or removed, a message is
shown when the television is switched on. To avoid that this message appears after every
channel update, you can switch it off.
To switch off the message...
1. Press , highlight Settings and press the centre button.
2. Highlight Channels and press .
3. Highlight Antenna/Cable Installation and press the centre button.
4. Enter your child lock pin code if necessary.
5. Select Channel Update Message.
6. Select Off.
7. Press  to go back one step or press  to leave the menu.
On some markets, the automatic channel update is done either while watching television
or when the television is in standby.
Manual channel update
You can always start an channel update yourself.
1. Press , highlight Settings and press the centre button.
2. Highlight Channels and press .
3. Highlight Antenna/Cable Installation and press the centre button.
4. Enter your child lock pin code if necessary.
5. Select Search for Channels, then select Start.
76