Loudspeaker Setup - Surround Sound; Surround Sound System - Bang & Olufsen BeoVision 7 Manual

Add Power Link speakers and a
BeoLab subwoofer to your
television and you have a

surround sound system.

A surround sound setup fits
easily into your living room. Let
the picture determine your ideal
viewing and listening position.
You get the best sound
experience in the area created by
the speakers.
If you have several speakers and
a Beo5 remote control, you can
enjoy the advantages of
Adaptive Sound Technology
instead of the setup described in
this chapter. See page 27.
Loudspeaker setup – surround sound
Select your speaker types
Switch on the television in TV or Home
cinema mode before you adjust speaker
settings.
To register the speaker types ...
> Bring up the TV SETUP menu and highlight
OPTIONS.
> Press the centre button to bring up the
OPTIONS menu and highlight SOUND.
> Press the centre button to bring up the
SOUND SETUP menu and highlight
SPEAKER TYPE.
> Press the centre button to bring up the
SPEAKER TYPE menu and Use the
navigation button left or right to reveal
your centre speaker type.
> Highlight CONFIG. This allows you to
select a CENTRE configuration as a single
speaker or a pair. Depending on which
centre speaker or speakers you select,
CONFIG may be greyed out and inaccessible.
> Press the navigation button down to move
to the next speaker and press use the
navigation button left or right to reveal
your speaker type.
> Press the centre button to store or press
BACK to leave the menu without storing.
22
SPEAKER TYPE
CENTRE 1 BEOLAB 7–4
CONFIG
SPEAKERS:
BEOLAB 4000
BEOLAB 4000
BEOLAB 4000
BEOLAB 5
BEOLAB 5
BEOLAB 4000
NONE
BEOLAB 5
NONE
NONE