Brake Pedal Rod Replacement - GMC G Service Manual

5A-16 HYDRAULIC BRAKES
10. Brake pedal (12).
11. Bushings (3).
H Install or Connect (Figure 18)
• Lubricate the pivot points with Delco Brake Lube or
equivalent.
1. Bushings (3).
2. Brake pedal (12).
3. Shaft (17).
4. Bolt (18) and nut (16).
5. Clutch pedal (11) (if equipped).
6. Return spring (5) (if equipped).
7. Clutch attaching components (15).
8. Pushrod (8).
9. Bolt (32).
10. Nut (31).
11. New pin (30).
• Check the stoplamp switch adjustment. Refer to
"Stoplamp Switch" in this section.
1. Bolt
2. Nut
3. Bushings
4. Spacer
5. Return Spring
6. Retainer
7. Washers
8. Pushrod
9. Washer
10. Pin
12. Brake Pedal
Figure 16 - r P30 Motorhome Brake Pedal Components
BRAKE PEDAL ROD
REPLACEMENT
P30 MOTORHOME MODEL
M Remove or Disconnect (Figure 19)
1. Retainer (6).
2. Nut (16).
3. Bolt (17) and washers (7 and 9).
4. Screws (18).
• Raise the vehicle and support it with suitable safety
stands.
5. Retainer (23).
6. Nut (22).
7. Bolt (19) and washers (20 and 21).
8. Brake rod (8).
9. Boot (24).
B-07771