Cowl Vent Grille Replacement; Grille Replacement - GMC G Service Manual

2B-18 SHEET METAL
4. Cable handle to dash screws.
5. Cable from the vehicle.
h 4! Install or Connect (Figure 19)
1. New cable to the vehicle.
2. Cable through the driver's side of the cowl.
• Push the grommet into the driver's side of the
cowl, and then push the insert into the grommet.
3. Cable handle to dash screws.
4. Cable into the sheet metal cross panel clip.
5. Cable to the primary latch.
COWL VENT GRILLE
REPLACEMENT
I+-+I Remove or Disconnect (Figure 20)
• Raise and support the hood.
1. Windshield wiper arms.
2. Cowl vent grille to cowl bolts (104) and screws (103).
3. Cowl vent grille from the vehicle.
4. Cowl seal from the vehicle.
Install or Connect (Figure 20)
1. Cowl seal to the vehicle.
2. Cowl vent grille to the vehicle.
3. Cowl vent grille to cowl bolts (104) and screws (103).
92
Figure 19 — Hood Release Cable Attachment
101. Bolt
4. Windshield wiper arms.

GRILLE REPLACEMENT

E Remove or Disconnect (Figures 21 and 22)
• Raise and support the hood.
1. Headlamp bezels.
2. Sheet metal cross panel to grille bolts.
3. Grille to lower front end panel bolts.
4. Grille from the vehicle.
5. Sheet metal to upper and lower radiator grille molding
nuts (110 and 112).
6. Upper and lower radiator grille moldings from the
vehicle.
[»♦] Install or Connect (Figures 21 and 22)
1. Upper and lower radiator grille moldings to the
vehicle.
2. Sheet metal to upper and lower radiator grille molding
nuts (110 and 112).
3. Grille to the vehicle.
4. Grille to lower front end panel bolts.
5. Sheet metal cross panel to grille bolts.
6. Headlamp bezels.
• Lower the hood.
F-07277