3B3-26 POWER STEERING
POWER STEERING OIL COOLERS
Some models are equipped with power steering system
oil coolers. Two types of coolers are used: tubular loop-type
and finned-type (figure 33).
h"H Remove or Disconnect (Figure 33)
1. Cooler power steering hose/pipe connections.
• Be prepared to catch any fluid that may drain
out at connections.
• Cap power steering hoses/pipes and cooler
ends to prevent entry of dirt.
Figure 31 — Power Steering Pump Mounting — G-Model
Figure 32 — Installing and Removing Pulley
2. Bolts (A or B).
3. Cooler.
h H install or Connect (Figure 33)
1. Cooler.
2. Bolts (A or B).
I ^ l Tighten
• Bolts to specifications shown on figure 33.
L00648
L00560