Rear Step Bumper Replacement; Rear Bumper License Plate Bracket Replacement - GMC G Service Manual

REAR STEP BUMPER
REPLACEMENT
M Remove or Disconnect (Figure 14)
1. Bracket to bumper nuts (111), and bolts (112).
2. Brace to bumper nuts (119), spring washers,
washers, and bumper bolts.
3. Bumper from the vehicle.
4. Brace to frame nuts (108) and bolts (110).
5. Braces (54).
6. Bracket reinforcement nuts (115) and bolts (109) (and
washers (114) where used).
7. Bracket reinforcements (113).
8. Brackets (55).
[» ♦] Install or Connect (Figure 14)
1. Brackets (55) and braces (54) to the frame.
2. Bolts (110) and nuts (108) loosely.
3. Bracket reinforcements (113).
• The reinforcements are marked as right or left on
their inboard sides.
4. Bolts (109) and nuts (115), and washers (114) (where
used).
\ Q \ Tighten
• Reinforcement nuts to 70 N«m (52 ft. lbs.).
51. Bumper Bar
54. Brace
55. Bracket
108. Nut
109. Bolt
110. Bolt
111. Bolt
112. Bolt
113. Reinforcement
114. Washer
115. Nut
116. Bolt
119. Nut
\++ \ Install or Connect (Figure 15)
119
Figure 14 — Rear Step Bumper Components
FRAME AND BUMPERS 2A-13
• Bracket and brace nuts to 70 N*m (52 ft. lbs.).
5. Bumper to the vehicle.
6. Bumper to brace bolts (116), washers, spring
washers, and nuts (119).
|^ [ | Tighten
• Nuts to 70 N«m (52 ft. lbs.).
7. Bumper to bracket bolts (112) and nuts (111).
Tighten
• Nuts to 70 N»m (52 ft. lbs.).
REAR BUMPER LICENSE PLATE
BRACKET REPLACEMENT
Remove or Disconnect (Figure 15)
1. License plate bracket to bumper nuts (123), spring
washers (122), washers (121), and bolts (124).
2. License plate bracket (120).
1. License plate bracket (120).
2. License plate bracket to the bumper bolts (124),
washers (121), spring washers (122), and nuts (123).
| Tighten
• Nuts to 29 N*m (21 ft. lbs.).
F-02311