Rear Bumper Replacement; Rear License Plate Bracket Replacement - GMC G Service Manual

2A-20 FRAME AND BUMPERS

REAR BUMPER REPLACEMENT

|<-»| Remove or Disconnect (Figure 26)
1. Outer brace to bumper nuts and bolts (254).
2. Inner brace to cross sill bolts (253).
3. Bracket to frame bolts (248) and washers (247).
4. Bumper from the vehicle.
5. Outer brace to cross sill bolts (252).
6. Outer braces (246).
7. Bracket to bumper nuts and bolts (254).
8. Brackets (55).
9. Inner brace to bumper nuts (251) and bolts (254).
10. Inner braces (249).
[♦ ♦ j Install or Connect (Figure 26)
1. Inner braces (249) to the bumper.
2. Assemble the top bolts (250) and nuts.
Tighten
• Nut to 30 N*m (22 ft. lbs.).
• Assemble the lower bolts (254) and nuts (251).
Tighten
• Nut to 30 N«m (22 ft. lbs.).
3. Brackets to the frame with washers (247) and bolts
(248).
• Assemble loosely.
4. Outer braces (246) to the cross sill with bolts (252).
Tighten
Bolts to 41 N»m (30 ft. lbs.).
Figure 26 — G-Model Rear Bumper Components
5. Bumper to the vehicle.
• Place the inner braces into the inner brace
panel holes.
6. Inner braces to the cross sill with bolts (253).
Tighten
• Bolts to 41 N»m (30 ft. lbs.).
7. Bumper to bracket bolts (254) and nuts.
Tighten
• Nuts to 29 N»m (21 ft. lbs.).
• Bracket to frame bolts to 68 N»m (50 ft. lbs.).
8. Outer bracket to bumper bolts (254) and nuts.
Tighten
• Nuts to 68 N«m (50 ft. lbs.).
REAR LICENSE PLATE BRACKET
REPLACEMENT
E
Remove or Disconnect (Figure 27)
1. License plate bracket nuts (255) and bolts (256).
2. License plate bracket (120).
|+<-| Install or Connect (Figure 27)
1. License plate bracket (120).
2. License plate bracket nuts (255) and bolts (256).
Tighten
• Nuts to 29 N«m (21 ft. lbs.).
51
51. Bumper Bar
55. Bracket
246. Outer Brace
247. Washer
248. Bolt
249. Inner Brace
250. Bolt
251. Nut
252. Bolt
253. Bolt
254. Bolt
L00502